Typically, strength and bearing capacity of the frame depends on the distance between the profiles of the frame. T is the more often installed profiles of the frame structure, the stronger the design and the thicker the sheets can be used to overlap the ceiling. It should be borne in mind that the more complicated the design of the ceiling, the more difficult it is to observe the frequency in the overlap of frame elements. After repairing the ceiling, we advise you to hang beautiful curtains for the bedrooms of the photo of which you will find at the given link.
It must be remembered that the design of the suspended ceiling carries a constant load that is by no means a small. The total total weight of the suspended ceiling can be up to three hundred kilograms in a room with an area of thirty -five square meters. The ceilings can also receive dynamic loads that appear due to impacts or large fluctuations in the atmosphere. A single -layer ceiling weighs on average fifteen kilograms per meter square area, two -layer – many more than twenty kilograms. If the total total loads can still be taken into account using simple calculations, since knowing the overall quadrature of the building, you can find out how much the structure will weighs. But it is almost impossible to take into account all dynamic loads, since all factors such as seismic unrest remain unaccounted for.